Slide Gate Operators

A slide operator is used when there is limited space behind the secured facility, so the gate runs parallel to the fence or wall.

Our Slide Gate Operators range from light to heavy-duty depending on the size of the entrance and quantity of open/close cycles. All the features and benefits are identical so selecting the operator is simple.

SL3000UL - Commercial Slide Gate Operator

The SL3000UL slide gate operator is the first choice for heavy-traffic applications and high-demand customers, including large development and management companies, prestigious residential gated communities and custom home builders.Featuring the highest quality components and backed by years of proven reliability, each unit is carefully inspected and mechanically tested to provide unsurpassed performance. Unique engineering innovations ensure than any SL3000ULTM models will meet the needs of almost every type of high-traffic gated entrance. All backed by the safety and reliability of the most advanced control board in the industry.

STANDARD FEATURES:

120V AC power
24V DC board
Built-in radio receiver
Highly efficient, extremely quiet
Surge/lightning protection
Alarm reset button
Weatherproof high-density polyethylene cover
Gold zinc-plated chassis eliminates corrosion
High-speed precision limit switches
Solid steel, machined pulley
#41 chain

Liftmaster SL930
This powerful DC system has the starting torque equivalent to that of a 2 1/4 HP AC motor. It features soft start/soft stop operation for mechanical parts protection. Optional equipment includes a battery backup system that is configurable to meet your power needs. This design supports a maximum gate weight of 1500 pounds and maximum gate length of 40 feet. Its continuous-duty motor has thermal overload protection and is fully enclosed.

FULL SYSTEMS CAPABILITY CIRCUIT BOARD

Built-in Radio Receiver
Built-in fully adjustable timer to close
Adjustable gate sensitivity feature
Fully adjustable inherent obstruction detection system
LED to ease installation and speed diagnostics
Safety inputs

STANDARD FEATURES

DC-based operator
Inherent obstruction sensing
External obstruction sensing
Control inputs
Single/dual gate operation
Electronic braking
Timer to close
Maximum run timer
LED indicators
Limit switches
Internal manual disconnect

Door king

The Model 9100 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9100 is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements.

9100 Commercial

9100

12"W x 24"H x 11.5"D

ADVANCED FEATURES

Self-adjusting, no maintenance magnetic limits.
Partial-open feature.
Anti-tailgating feature.
Gate tracker reporting output.
Ports for plug-in loop detectors.
Two convenience outlets.
Fail-safe release (fail-secure optional).
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.

SPECIFICATIONS

Model 9100

Maximum gate length 30-feet.
Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
1/2 HP continuous-duty motor.
115 VAC, 5.4 Amps.
Operator is shipped with chain brackets and 20-feet of #41 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions: 12"W x 24"H x 11.5"D

OPTIONS AVAILABLE WITH THIS OPERATOR

#40 chain
Nickel plated chain
Stainless steel chain
Plug-in loop detectors
Heater kit for cold environments
Base plate to post mount this operator (does not include posts).Surge suppressors