Swing Gate Operators

A swing operator is used when the gate (or two gates) opens inward or outward away from the wall.
Swing Gate Operators range from light to heavy-duty depending on the size of the entrance and quantity of open/close cycles. All the features and benefits are identical so selecting the operator is simple.

CSW200UL - Commercial Swing Gate Operator

The CSW200UL models of swing gate operators are the first choice for heavy-traffic applications such as large gated communities, residential developments, commercial complexes and private estates. Unlike other systems, the CSW gate operators are designed with a "non-scissor action" swing arm to greatly reduce the risk of injury. And all models include the safety and reliability of our OmniControlTM board, the most advanced control board in the industry.Featuring the highest quality components and backed by years of proven dependability, each unit is carefully inspected and mechanically tested to provide unsurpassed reliability. Unique engineering innovations in each model also ensure that there´s a CSW to meet practically every swing gate application.

STANDARD FEATURES:

120V AC power
24V DC board
Built-in radio receiver
Highly efficient, extremely quiet
Surge/lightning protection
Alarm reset button
Weatherproof high-density polyethylene cover
Gold zinc-plated chassis eliminates corrosion
High-speed precision limit switches
Solid steel, machined pulley
#41 chain

Door King
The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.


Pad Mount - 13.25"W x 12"H* x 23"D		Post Mount - 13.25"W x 12"H* x 23"D

ADVANCED FEATURES

Self-adjusting, no maintenance magnetic limits.
Overlap feature for dual swing gate operation.
Designed with a built-in primary and secondary entrapment prevention system.
Ports for plug-in loop detectors.
Fail-safe release.
Tamper detect circuit.
DC Powered convenience open (Option on 6100 only).
Gate tracker reporting output.
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.

SPECIFICATIONS

Model 6050

Maximum gate width 10-feet.
Maximum gate weight 400 pounds* (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator).
Swings gate 90 degrees in approximately 10-seconds.
1/2 HP limited-duty motor.
115 VAC, 4.3 Amps.
Class I applications.
Compliant with UL 325 and 991
ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions (operator only): 13.25"W x 12"H* x 23"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Model 6100

Maximum gate width 14-feet.
Maximum gate weight 500 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
Swings gate 90 degrees in approximately 10-seconds. · 1/2 HP continuous-duty motor.
115 VAC, 5.4 Amps. · Class I and Class II applications.
Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) · Dimensions (operator only): 13.25"W x 12"H* x 23"D (28"D with convenience open option) (* Height of operator only. Actual height above ground is determined by which mounting method is used)

OPTIONS AVAILABLE WITH THESE OPERATORS

Bi-parting gate connection cable (6050 slave operator is shipped with 30-feet of cable; 6100 slave operator is shipped with 40-feet of cable.)
Post or pad mount - specify which
DC powered convenience open (6100 only).Plug-in loop detectors
Heater kit for cold environments.Surge suppressors